Here is my entrance
facade for Bloodsworth Manor 2002.
I removed a fence panel and put this
up in its place.
The distance between the columns is eight feet.
Here is the original concept.
It will be made out of five sheets of
OSB.
The pillars are almost complete.
I just need to add a little more paint.
They stand 6 foot tall.
Each column is made of one 4x8 sheet
of OSB. I added foam borders around all sides. I like
the depth it gives. I then distressed and torched it to add
age.
The arched facade is put
in place.
This pic was taken at night, before the doors were finished.
I used a Dremel tool with a router attachment to carve out the
title; Bloodsworth Manor. You can see where I marked
where the doors are going to be cut out.
Yea, I got the doors cut
out, hinged and painted!
Almost there...
Cemetery Fence and lights
added...
Almost ready for victims... err, uhh... Trick
or Treaters.
All information presented on this website is presented 'as is', with no
warranty,
suitability, or fitness of purpose implied.
I do not accept any responsibility for any injury resulting from use or misuse
of this information.
Your use of this information constitutes acceptance of these terms.
